“Klarna’s Pay in 3 / Pay in 30 days are unregulated credit agreements. Borrowing more than you can afford or paying late may negatively impact your financial status and ability to obtain credit. 18+, UK residents only. Subject to status. Late fees may apply. Ts&Cs apply.”.
Morningstar Relay Driver RD-1 for multi-channel voltage and parameter control functions
£159.99
Fully programmable 4 channel relay switch for advanced voltage control, fault / alarm control, load control and generator autostart control of any 12V/24V/36V/48V DC system
10 in stock
Delivery
Description
As an official distribution partner of Morningstar products across the globe, we are proud to offer solar power equipment from this world-leading supplier. Innovative design from years of dedicated research and superior build quality enable these top-of-the-range products to achieve consistently high performance standards.
This innovative Morningstar Relay Driver is a highly flexible and fully programmable logic relay module which is capable of switching appliances on/off or sending a signal / generating an alarm when a predefined event occurs. The types of events which can be programmed into the relay driver to trigger a response include:
The relay driver includes 4 independent programmable channels which can work separately or together. In essence, each of the channels is a 750mA switch – which when activated – will connect this channel terminal to the ground terminal, thereby closing the necessary circuit. This action can enable a load, power a relay or trigger any other event as required. The outputs of multiple channels can be combined in various 'AND/OR' combinations to achieve the desired result. Each channel can also act as a sensor itself, to measure voltage or another parameter to trigger a response through other available channels.
The most common working mode for this relay driver is a Threshold control mode. In this setup, the driver works by constantly monitoring a certain parameter, for example: the battery voltage level (or a voltage level coming from another source), or temperature. When a defined high or low setpoint is achieved, the relay driver triggers a required action. For example, it can start powering a small load or turn on a bigger relay which connects a large load to the battery. It can start a generator or enable an external mains battery charger. It can send a signal to audible or visual alarm etc. The flexibility of all these actions and the response generated by the relay driver can be further enhanced and refined through additional threshold parameters such as a delay timer or min/max value limits.
Another working mode is GenStart. This is an advanced generator control mode which can have up to 3 channels programmed to start a generator when a certain event occurs. While it can work as a standard On/Off dry contact generator control for small and simple generators, in this mode the relay driver can also manage advanced generators which have a 3-wire control system. In this set up, the driver generates different types of signals that the generator requires to operate, such as: Run, Pre-crank (Pre-Heat), Crank (Momentary Run), Load, Stop etc; each with various durations, sequences and delays of these signals relative to each other.
The relay driver can be used as a standalone unit or as part of a larger system with a Morningstar TriStar solar charge controller or another Morningstar device (connected to the relay driver via a Meter Bus network). In this set up, the relay driver can work in Alarm / Fault mode where it activates a channel in response to a fault or alarm generated by the controller or another Morningstar device. A range of faults and alarms that can be monitored is vast and includes overcurrent, short circuits, miswiring, overheating, connection problems etc.
A truly versatile product, this relay driver can be used in a limitless number of applications and scenarios, for example:
The relay driver is supplied with a PC connection cable which allows the unit to be easily programmed via the free Morningstar MSView Software.
This product is suitable for a wide range of battery voltages from 12V to 48V.
Click on the Details and Specifications tab for more information about this product.
Specifications
Relay Driver Specifications:
This product is covered by a 5 year warranty. For more information please refer to our Terms and Conditions.
Installation
This product comes with an instruction manual (see the 'Documents' tab for a download link) which explains connections and operations.
If you need help with installation or have any technical questions we can provide FREE support – please contact us by email or phone (see Contact Us page for more information).
Documents and links
The following documents are available to download:
Instruction manual for Morningstar Relay Driver RD-1
Product Datasheet for Morningstar Relay Driver RD-1
Product Overview and Applications for Morningstar Relay Driver RD-1
Applications guide for Morningstar Relay Driver RD-1
Load control data for Morningstar Relay Driver RD-1
Networking & communications for Morningstar Relay Driver RD-1
Modbus specifications for Morningstar Relay Driver RD-1
Morningstar MSView software is available to download here:
Morningstar MSView software download
Additional information
Photonic Universe
Related Products
Morningstar TriStar 60A PWM solar / wind controller for caravans, motorhomes, boats and yachts
Morningstar TriStar remote LCD digital meter, for all TriStar solar charge controllers
Morningstar SunSaver 10A 24V solar charge controller for motorhomes, boats, marine, oil and gas, telecom and instrumentation
Morningstar remote LCD meter RM-1 for SunSaver Duo controllers, SunSaver MPPT controllers and SureSine inverters
Morningstar EMC-1 Ethernet Meterbus Converter for remote monitoring of Morningstar controllers
Morningstar TriStar 45A PWM solar / wind controller for caravans, motorhomes, boats and yachts
Morningstar TriStar 30A MPPT solar charge controller for caravans, motorhomes, boats and yachts
morningstar sunsaver duo 25a 12v dual battery solar controller (with remote lcd meter) for caravans, motorhomes, boats and yachts
Morningstar SunSaver 20A 12V solar charge controller for motorhomes, boats, marine, oil and gas, telecom and instrumentation
Morningstar MeterHub HUB-1 for linking several TS and TS-MPPT controllers to one single remote meter